KATLAX offers range of relay units with rail mounting facility which take proximity switch signal as input and convert it into required control logic. Relay units for other control panel requirements are also included.
Namur Amplifier Relay Unit
| This unit acts as interface for NAMUR Proximity Sensors especially used in HAZARDOUS areas. Very low signal current change produced by NAMUR SENSOR placed distant in Ex-proof area is amplified by this unit to give output relay changeover which can be used for system automation. |
|
 |
Temperature Controller Single Set Point
| Supply Voltage |
: |
90 - 270 VAC / DC |
|
| Display |
: |
4 Digital 0.56" Red |
| Set Points |
: |
0°C-400°C, 0°C-1200°C, 0°C-1600°C |
| Control Accuracy |
: |
Better than 1% |
| Setting |
: |
Absolute 10 Turm Pot |
| Inputs |
: |
RTD (Pt -100) or J, K, R -Type Thermocouple |
| Control Action |
: |
On / Off type with Hysteresis
1) Heaer ON LED
2) Sensor Break Message |
| Relay Output |
: |
2C/O @ 5A, 230 VAC |
| Hysteresis |
: |
10% of Full Scale |
| Housing |
: |
ABS Plastic (96 × 96 × 85 mm) |
| Weight |
: |
Approx. 260 gms |
| Mounting |
: |
DIN Rail - Panel Mount |
| |
RH, Pressure, Temp. Indicator |
| Supply Voltage |
: |
230 VAC ± 10% @ 50 Hz |
|
| Display Type |
: |
Seven Segment Red 0.56" |
| Display |
: |
Digit, 3 Row |
| Input |
: |
4 to 20 mA / Per Channel |
Scale Factor
|
|
|
Temp.
Humidity
Pressure |
:
:
: |
-50°C to 150°C
0 to 100%
0 to 100Pa |
| Resolution |
: |
0.1 & 1 |
| Accuracy |
: |
0.1% of span ± digit |
| Temperature |
: |
Operating : 0°C to 50°C, Storage : -5°C to 60°C |
| Housing |
: |
ABS Plastic (96 × 96 × 85 mm) |
| Weight |
: |
Approx. 380 gm. |
| Mounting |
: |
DIN Rail - Panel Mount |
| |
RH &Temperature Indicator |
| Supply Voltage |
: |
230 VAC ± 10% @ 50 Hz |
|
| Display Type |
: |
Seven Segment Red 4.0" |
| Display |
: |
3 Digit -Scrolling (Every 5 sec.) |
| Display Quantity |
: |
Humidity & Temperature |
Display Range
|
|
|
Temp.
Humidity |
:
: |
-25°C to 150°C
0 to 100% |
| Resolution |
: |
0.1% RH & 0.2°C |
| Accuracy |
|
|
Temperature
Humidity |
:
:
:
: |
0.6°C @ 25°C
@ 25*C
2.5% (20 to 80% RH)
3.5% (0 to 20%, 80 to 100%) |
| Housing Material |
: |
Metal - Black Powder Coated |
| Housing Size |
: |
405 × 160 × 100 mm |
| Mounting |
: |
Ceiling Mount |
| |
Motor Protection Relay Unit |
| Supply Voltage |
: |
24V / 110V / 230VAC @ 50 Hz ± 20% 24 VDC ±20% |
|
Power Consumption
Control Circuit |
: |
3 VA |
| Nominal Tripping |
: |
60°C to 180°C |
| Cold Resistance |
: |
< 1.5 K Ω |
| Response Value |
: |
3.0 KΩ ± 200Ω |
| Reset Value |
: |
1.6 KΩ ± 200Ω |
Short Circuit
Detection |
: |
@ <= 200Ω |
| Output Contacts |
: |
2C/O @ 5A, 230VAC |
| Indication |
: |
Red for Power, Green for Replay
Yellow for Short Circuit Detection |
| Housing Size |
: |
ABS Plastic, 70 × 110 × 53 mm |
| Mounting |
: |
Panel Mount - DIN Rail |
| Termination |
: |
Terminal Compartment (1 × 2.5 sq. mm) |
| Protection |
: |
IP 54 |
| |
|
|
|
For further information / customized requirement, email us at
info@katlax.com
