Sense · Connect · Integrate · Control · Safety

Peripherals & Relay Units

Peripherals & Relay Units

KATLAX offers range of relay units with rail mounting facility which take proximity switch signal as input and convert it into required control logic. Relay units for other control panel requirements are also included.


Namur Amplifier Relay Unit

This unit acts as interface for NAMUR Proximity Sensors especially used in HAZARDOUS areas. Very low signal current change produced by NAMUR SENSOR placed distant in Ex-proof area is amplified by this unit to give output relay changeover which can be used for system automation.  

Temperature Controller Single Set Point

Supply Voltage : 90 - 270 VAC / DC

Display : 4 Digital 0.56" Red
Set Points : 0°C-400°C, 0°C-1200°C, 0°C-1600°C
Control Accuracy : Better than 1%
Setting : Absolute 10 Turm Pot
Inputs : RTD (Pt -100) or J, K, R -Type Thermocouple
Control Action : On / Off type with Hysteresis
  1) Heaer ON LED
  2) Sensor Break Message
Relay Output : 2C/O @ 5A, 230 VAC
Hysteresis : 10% of Full Scale
Housing : ABS Plastic (96 × 96 × 85 mm)
Weight : Approx. 260 gms
Mounting : DIN Rail - Panel Mount
 

RH, Pressure, Temp. Indicator

Supply Voltage : 230 VAC ± 10% @ 50 Hz

Display Type : Seven Segment Red 0.56"
Display : Digit, 3 Row
Input : 4 to 20 mA / Per Channel
Scale Factor
   
Temp.
Humidity
Pressure
:
:
:
-50°C to 150°C
0 to 100%
0 to 100Pa
Resolution : 0.1 & 1
Accuracy : 0.1% of span ± digit
Temperature : Operating : 0°C to 50°C, Storage : -5°C to 60°C
Housing : ABS Plastic (96 × 96 × 85 mm)
Weight : Approx. 380 gm.
Mounting : DIN Rail - Panel Mount
 

RH &Temperature Indicator

Supply Voltage : 230 VAC ± 10% @ 50 Hz

Display Type : Seven Segment Red 4.0"
Display : 3 Digit -Scrolling (Every 5 sec.)
Display Quantity : Humidity & Temperature
Display Range
   
Temp.
Humidity
:
:
-25°C to 150°C
0 to 100%
Resolution : 0.1% RH & 0.2°C
Accuracy    
Temperature
Humidity
:
:
:
:
0.6°C @ 25°C
@ 25*C
2.5% (20 to 80% RH)
3.5% (0 to 20%, 80 to 100%)
Housing Material : Metal - Black Powder Coated
Housing Size : 405 × 160 × 100 mm
Mounting : Ceiling Mount
 

Motor Protection Relay Unit

Supply Voltage : 24V / 110V / 230VAC @ 50 Hz ± 20% 24 VDC ±20%

Power Consumption
Control Circuit
: 3 VA
Nominal Tripping : 60°C to 180°C
Cold Resistance : < 1.5 K Ω
Response Value : 3.0 KΩ ± 200Ω
Reset Value : 1.6 KΩ ± 200Ω
Short Circuit
Detection
: @ <= 200Ω
Output Contacts : 2C/O @ 5A, 230VAC
Indication : Red for Power, Green for Replay
  Yellow for Short Circuit Detection
Housing Size : ABS Plastic, 70 × 110 × 53 mm
Mounting : Panel Mount - DIN Rail
Termination : Terminal Compartment (1 × 2.5 sq. mm)
Protection : IP 54
     

For further information / customized requirement, email us at info@katlax.com